Polymaster Filters and Tank Accessories

Vortex Fine Filter

Unique innovative Rainwater Filtering by Vortex Adhesion for Underground Tank Storage. Fitted to a horizontal drain pipe, it filters and diverts the rainwater to a storage tank. The incoming rainwater runs out of the horizontal drain pipe into the side of the Filter and is then led in a vortex to the filter housing below. There the rainwater is drawn through the vertically placed fine filter by adhesion and is led through the outlet to the storage area, whilst the dirt is rinsed away with the remaining water to drain. If necessary (for deeper underground installation) an extension pipe can be installed up to ground level (accessory). The rainwater inlet can be turned 360° in relation to the lower part. The central drain outlet is vertical so that pipes can be connected in any direction.
Particles larger than .44 mm are directly rinsed away into the drain.

FIlter features include:
  • Capture more than 90% while cleaning your filter as well.
  • Filtering to 0.44 mm all by gravity
  • Intended for below ground installation
  • Withstands up to 30 tonne vehicles
  • Ideally used with Polymaster Underground Tanks
  • How the Vortex Filter works
 

URVFO1
Vortex Filter for Roof area up to 200 sqm

  URVF15
Vortex Filter for Roof area up to 500 sqm

 
     
URVF30
Vortex Filter for Roof area up to 3000 sqm
     



First Flush Water Diverter (FFWD)

This FFWD has been designed to fit onto the outside of most round tanks to keep your rainwater extra clean.
It will fit almost any round tank in our range (RWT1600 - RWT31700).

Special Features:

  • Large 60 litre capacity and available in all tank colours.
  • Easily attached through specially designed manhole covers on the roof of the tank.
  • Collects the first 60 litres of sedimented run-off, keeping it from entering the main tank.
  • Fits into new style manhole cover and can be fitted to existing tanks.
  • Catchment tank can be easily cleaned.
  • Special manhole covers are included with the First Flush Water Diverter if ordered with a new tank.

FFWD
First flush Water Diverter - 60 ltr

 

MHCFD5
Water diverter cover to suit 300 mm inlet, suits: RWT2270T, RWT1600 and RWT3300 tanks
MHCFD4
Water diverter cover to suit 400 mm inlet, suits RWT9000, RWT7100, RWT4500 and RWT2270LP tanks
MHCFD1
Water diverter cover to suit 600 mm inlet, suits tanks RWT13600 to RWT31700 with 600mm manhole opening



Water Level Indicators

  Levetator (LT01)
  • Levetator - very popular level gauge. The Levetator shows the actual water level.
    Trouble free use -
    Aluminium, Stainless Steel and treated cord. In operation since 1985.
  Dipstik (DPK1)
  • Dipstik - protrudes above roof. 360º all round visibility.
  Liquidator (LQ01)
  • Liquidator - only float in contact with liquid $184.00. Ideal for chemical and liquid fertiliser tanks, only float in contact with liquid.
Level Devil (LD01)
  • Same principal as the Liquidator but suitable for tanks up to 1.8 metres high.Suits smaller tanks.



Rain Alert (RALM)

Rain Alert wireless level indicator. A wireless measurement device that allows you to monitor the level
of your tank/s from the comfort of your own home. 

 

LT01 Levetator

  • Very popular level gauge

DPK1 Dipstik

  • Protrudes above roof

LQ01 Liquidator

  • Only float in contact with liquid 

RALM

  • Rain alert wireless level indicator 



CFA Coupling and Cap

A fire fighting fitting ready for instant hook on by country fire-fighting authorities. VIC and SA couplings available.

  • CFA2 includes 65 mm coupling, 50 mm outlet and tested and approved gate valve.
  • Optional CFA cap screws on to seal coupling.
 
  CFAC
  • CFA Coupling Cap
CFA2
  • CFA Tank Coupling 50 mm Outlet & Gatevalve



Water Filters

Special Features:

  • Removes dirt, rust, sediment, taste and odour when used with a carbon cartridge.
  • Easily fits inline on pipe work.
  • PM10M will fit under sink/hand basin or onto tank.
  • PM201 designed for a whole house.
  • Other filters available.
  PLC101
  • 10” carbon filter cartridge
  PM10M
  • 10” filter housing 20 mm ports
  NCP20
  • 20” carbon filter cartridge
  PM201
  • 20” filter housing 25 mm ports



Tank Fire Fighting Kit

All fittings included as shown. This versatile tank fire fighting kit is both compact and portable. All fittings supplied for hook onto tank.

Equipped with:

  • 5.5 hp motor and fire fighting pump.
  • 36 mtr fire hose reel.
  • Heavy duty galvanised frame. 
  TFFK
  • Tank fire fighting kit with 36 mtr hose reel



Leaf Eater Water Diverter

This first flush device fits to the downpipe and comes in a kit form - just add pipe. Takes the first flow of water from the roof gutter, seals it off and then automatically diverts the flow to the tank.

 

LWD

  • Leaf Eater Water Diverter

 




Leaf Eater Rainhead

These work extremely well mounted directly below the downpipe. Primary screen diverts leaves from the gutter to the ground with a secondary s/steel screen to stop insects. A smaller Leaf Beater Rainhead also available. (LBRH)

   

LERD

  • Leaf Eater Rainhead
  • LBRH

  • Leaf Beater Rainhead (small type)



Rain Gauge

Heavy duty reliable rain gauge complete with mounting bracket and screws.

RWG

  • Rain Gauge

 




Manhole Covers

A manhole cover is available as an option for every size tank. These can be used with or without strainer.

MHC1

  • Flat cover for 600 mm manhole opening (for tanks from 13,600 to 31,700).

 

 

MHC3

  • Water Entry Cover:
    This cover fits over all 400 mm openings and allows for your inlet pipe to enter but eliminates access of dust, leaves and sunlight through the strainer.
 
 
     

MHC4

  • Flat cover for: RWT9000, RWT7100, RWT5000, RWT4500 and RWT2270LP.

 

     
  B&S Stock & Pet Supplies, Enquiry
Pet & Stock Supplies Bannockburn
Bannockburn Fencing Supplies
Geelong Water Tanks
Vegie Beds Bannockburn
Firewood, Fire Fuel Bannockburn & Geelong